Sanusi A. Kamilu; Mohammad D. Abdul Hakeem; Lanre Olatomiwa

Design and Comparative Assessment of State Feedback Controllers for Position Control of 8692 DC Servomotor

Full Text (PDF, 449KB), PP.28-33

Views: 0 Downloads: 0

Author(s)

Sanusi A. Kamilu ^1,* Mohammad D. Abdul Hakeem ¹ Lanre Olatomiwa ²

1. Department of Electrical Engineering, Waziri Umaru Federal Polytechnic, Birnin Kebbi, 860262, Nigeria

2. Department of Electrical and Electronics Engineering, Federal University of Technology, PMB 65, Minna, Nigeria

* Corresponding author.

DOI: https://doi.org/10.5815/ijisa.2015.09.04

Received: 20 Dec. 2014 / Revised: 8 Mar. 2015 / Accepted: 11 May 2015 / Published: 8 Aug. 2015

Index Terms

Position Control, Pole Placement, DC Servomotor, State Feedback Controllers, MATLAB/SIMULINK

Abstract

Accurate control of servomotor in proper positioning of objects is of utmost importance in industrial applications. This paper presents the position control of dc servomotor using pole placement technique via Ackerman’s formula. The mathematical model governing the dynamics of brush dc Pittman servomotor is developed and is then used to analyze which among the full state-feedback controller, feedback controller with feed-forward gain and integral controller with state feedback (SFB) will yield the best control performance. The steady state error, settling time and degree of overshoot are parameters on which the performance level is based. The whole simulation is validated using MATLAB/SIMULINK.

Cite This Paper

Sanusi A. Kamilu, Mohammad D. Abdul Hakeem, Lanre Olatomiwa, "Design and Comparative Assessment of State Feedback Controllers for Position Control of 8692 DC Servomotor", International Journal of Intelligent Systems and Applications(IJISA), vol.7, no.9, pp.28-33, 2015. DOI:10.5815/ijisa.2015.09.04

Reference

[1]Aung, C.H., K.T. Lwin, and Y.M. Myint, Modeling Motion Control System For Motorized Robot Arm using MATLAB. PWASET VOLUME ISSN, 2008: p. 2070-3740.
[2]Chen, S.-L. and H.-N. Dinh, Design Applications of Synchronized Controller for Micro Precision Servo Press Machine. 2014.
[3]Servo Motor Applications in Robotics Solar Tracking Systems. [cited 2015 03/02]; Available from: http://www.electrical4u.com/servo-motor-applications-in-robotics-solar-tracking-system-etc/.
[4]Ramli, M., M. Rahmat, and M. Najib. Design and Modeling of Integral Control State-feedback Controller for Implementation on Servomotor Control. in 6th WSEAS International Conference on Circuits, Systems, Electronics, Control & Signal Processing, Cairo, Egypt. 2007.
[5]Paraskevopoulos, P., Modern control engineering. Vol. 10. 2001: CRC Press.
[6]Barsaiyan, P. and S. Purwar. Comparison of state feedback controller design methods for MIMO systems. in Power, Control and Embedded Systems (ICPCES), 2010 International Conference on. 2010. IEEE.
[7]M.S. Ramli, M.F. Rahmat, and M.S. NAJIB, Design and Modeling of Integral Control State-feedback Controller for Implementation on Servomotor Control.
[8]Valášek, M. and N. Olgaç, Pole placement for linear time-varying non-lexicographically fixed MIMO systems. Automatica, 1999. 35(1): p. 101-108.
[9]Mahfouz, A.A., M. Mohammed, and F.A. Salem, Modeling, Simulation and Dynamics Analysis Issues of Electric Motor, for Mechatronics Applications, Using Different Approaches and Verification by MATLAB/Simulink. International Journal of Intelligent Systems and Applications (IJISA), 2013. 5(5): p. 39.
[10]Nagrath, I., Control systems engineering. 2006: New Age International.
[11]Katsuhiko, O., Modern control engineering. 2010.
[12]Nise, N.S., CONTROL SYSTEMS ENGINEERING, (With CD). 2007: John Wiley & Sons.

International Journal of Intelligent Systems and Applications (IJISA)