Application of Neural Network on Burr Expert System in Micro-machining

Full Text (PDF, 460KB), PP.1-9

Views: 0 Downloads: 0

Author(s)

Yun-Ming Zhu 1,* Jun-Ping Chen 1 Gang Zheng 1

1. Jiangsu University, Zhenjiang, China

* Corresponding author.

DOI: https://doi.org/10.5815/ijisa.2011.01.01

Received: 25 Apr. 2010 / Revised: 2 Aug. 2010 / Accepted: 23 Nov. 2010 / Published: 8 Feb. 2011

Index Terms

Burr expert system, neural network, micro-machining, burr prediction, edge quality

Abstract

The demands placed by designers on workpiece performance and functionality are increasing rapidly. Important aspects of manufacturing’s contribution to the fulfillment of these demands are the conditions at the work piece edges. However, Burrs are often created on the workpiece edges in micro-machining. In many cases, time consuming and expensive deburring processes have to be applied in order to ensure the desired part functionality. Burrs make troubles on production lines in terms of deburring cost, quality of products and cutting tool wear. To prevent problems caused by burrs in micro-machining, prediction and control of burr size is desirable. Experimental studies show that burr formation in micro-milling is a highly complex process depending on a number of parameters such as material properties, tool geometry and cutting parameters. It is very difficult to establish the relationship between burr sizes and cutting conditions. A web-based micro-machining burr expert system for burr sizes prediction and control was developed using ASP.NET platform. Burrs types and sizes prediction and cutting conditions optimization for burr controlling which based on the reasoning method of BP neural networks are realized. Operation results show that the system is reliable. It provides a new technology for burrs modelling and controlling.

Cite This Paper

Yun-Ming Zhu, Jun-Ping Chen, Gang Zheng,"Application of Neural Network on Burr Expert System in Micro-machining", International Journal of Intelligent Systems and Applications(IJISA), vol.3, no.1, pp.1-9, 2011. DOI: 10.5815/ijisa.2011.01.01

Reference

[1] Nakayama, Kazuo, “ Burr formation in metal cutting,” CIRP Annals, Yokohama Natl Univ, Jpn, Yokohama Natl Univ, Jpn, Arai, v, 36, n 1, pp 33-36, 1987.

[2] Gillespie, L.K.; Blotter, P.T., “Formation and properties of machining burrs,” Journal of Engineering for Industry, Transactions of the ASME, v 98 Ser B, n 1, p 66-74, Feb 1976.

[3] Iwata, K., Ueda, K., Okuda, K., “Study of Mechanism of Burrs Formation in Cutting Based on Direct SEM Observation”, Nagoya Univ, Japan, J.of JSPE, 48, 1982, pp.510-515.

[4] Chern, G.L., “ Analysis of Burr Formation and Breakout in Metal Cutting”, Ph.D. Dissertation, Dept. of Mech.Engr., Univ. of California, Berkeley, April, 1993.

[5] Rangarajan, A., and Dornfeld, D., “Efficient Tool Paths and Part Orientation for Face Milling”, CIRP Annals- Manufacturing Technology, Lab. for Manufacturing Automation, Dept. of Mechanical Engineering, University of California, Berkeley, v 53, n 1, p 73-76, 2004.

[6] Lee, K., and Dornfeld, D., “ Micro-burr Formation and Minimization through Process Control”, Precision Engineering, Department of Mechanical Engineering, University of California at Berkeley, Berkeley, CA 94720, United States, v 29, n 2, p 246-252, April 2005.

[7] Sofrons, A., “ Reduction of Burr Formation in Drilling”, S.M.E. Techinical Paper , Fabr Conf, Dearborn 00001500, MR75-376, 1976.

[8] Sofrons, A., “ The Formation and Control of Drilling Burrs”, Ph.D. dissertation, The University of Detroit. 1975.

[9] Ko,S.L., Dornfeld, D.A., “Analysis of Fracture in Burr Formation at the Exit Stage of Metal Cutting”, Journal of Materials Processing Technology, Elsevier Science Inc, ISSN: 09240136; DOI: 10.1016/0924-0136(95)02124-8, Vol. 58, n 2-3, p 189-200, Mar 15 1996.

[10] Kumar,S., “Basic Mode for Burr Prediction System”, CODEF/NSF research report, University of California, Berkeley, 2000.

[11] Wang,G.C., Zhu Y.M., Zhang C.Y., “Mathematical model of two side-direction burr formation”, ACTA ARMAMENTARII, Beijing, China, ISSN 1000-1093, V24, n,4, pp. 513-515, 2003.

[12] S. Kumar, D. A. Dornfeld, “Basic approach to a prediction system for burr formation in face milling, ” Journal of Manufacturing Processes, Vol. 5, Iss. 2, 2003 , pp 127-143.

[13] J. Kim, D. A. Dornfeld, “Cost minimization of drilling operation by a drilling burr control chart and bayesian statistics,” SME J. Manufacturing Systems, Vol. 20, No. 2, 2001, pp. 89-97.

[14] C. H. Chu, D. A. Dornfeld, "Tool path planning for avoiding exit burrs, ” J. of Manufacturing Processes, Vol.2, No. 2, 2000, pp 116-123.

[15] M. C. Avila, “The effect of kinematical parameters and tool geometry on burr height in face milling of Al-Si alloys,” unpublished.

[16] T. L. Liu, X. M. Yang, and G. J. Kalambur, “Design for machining using expert system and fuzzy logic approach,” ASME J. Mater. Eng. Perform, California State Univ - Sacramento, Sacramento, United States, Vol. 4, No.5, 1995, pp 599-609.

[17] G. H. Choi, D. Lee, N. Chang, and S. G. Kim, “Optimization of process parameters of injection molding with neural network application in a process simulation environment,” Ann.CIRP, Inst of Advanced Engineering, Seoul, Korea, Republic of ,Vol. 43, No. 1, 1994, pp 449-452.

[18] Zhu,Y.M., “Study on Formation and Controlling of Metal Cutting Burr and Development of Burr Expert System”, Ph.D. Dissertation, Dept. of Mech.Engr., Univ. of Jiangsu, Zhenjiang, June, 2006.

[19] Amit,B., Kiha,L., “Tool Path Planning in Conjunction with Exit Order Sequence”, LMR research report, University of California, Berkeley, 2001-2002, pp.30-35.