Analyzing Defects of Solar Panels under Natural Atmospheric Conditions with Thermal Image Processing

Full Text (PDF, 1612KB), PP.10-21

Views: 0 Downloads: 0

Author(s)

Akash Singh Chaudhary 1,* D K Chaturvedi 1

1. Department of Electrical Engineering, Faculty of Engineering, DEI, Agra-282005, UP, India

* Corresponding author.

DOI: https://doi.org/10.5815/ijigsp.2018.06.02

Received: 23 Feb. 2018 / Revised: 22 Mar. 2018 / Accepted: 20 Apr. 2018 / Published: 8 Jun. 2018

Index Terms

Bird Deposits, Dust and Dirt, Shading Effect, Solar Panels, Thermal Image Processing

Abstract

Sun is an ultimate source of energy, which is clean, inexhaustible and safe for environment. The energy obtained from sun is known as solar energy. When solar radiations fall on earth surface solar cells convert these solar radiations into electrical energy. Solar cells are one of the important components of solar panels. Many solar cells combine in series or in parallel to form solar module and solar panels. A solar photovoltaic array is a combination of solar panels and is installed in open atmospheric condition. The natural conditions such as dust and dirt, shade of tree affect operation of solar panels. These natural conditions cannot be avoided but can be analyzed using visual inspection and thermal camera. The visual inspection approach is useful only when the defects are visible by naked human eye but when defects cannot be visualized by naked human eye thermo-graphical approach is used. This paper discusses the identification of various defects in solar panels by applying image processing technique applied for thermal images under natural atmospheric conditions for visual inspection, shading effect of tree, dust and dirt deposition effects on solar panels using thermal imaging camera. 

Cite This Paper

Akash Singh Chaudhary, D.K.Chaturvedi ," Analyzing Defects of Solar Panels under Natural Atmospheric Conditions with Thermal Image Processing ", International Journal of Image, Graphics and Signal Processing(IJIGSP), Vol.10, No.6, pp. 10-21, 2018. DOI: 10.5815/ijigsp.2018.06.02

Reference

[1]Redfield, D., “Solar energy and conversion”, Technology and Society, IEEE Journals and Magazines, vol. 6, no. 23, pp. 4-9, 1978.

[2]Biran, D., Braunstein, A., “Solar radiation and energy measurements”, IEEE Trans. Power Apparatus and Systems, vol. 95, no. 3, pp. 791-794, 1976.

[3]Al-Tabtabaei, J.A., “Studying the Factors Affecting the Solar Power Generation Systems Performance (SPGSP)”, Int. J. Engineering Research and Applications, vol. 4, no. 12, part-2, pp. 30-58, 2014.

[4]Al-Tabtabaei, J.A., “Reviewing the factors of the Energy systems for Improving the Energy Efficiency”, Int. J. Engineering Research and Applications, vol. 5, no. 8, part-4, pp. 57-64, 2015.

[5]Rizwan, M., Jamil, M., Kothari, D.P., “Generalized Neural Network Approach for Global Solar Energy Estimation in India”, IEEE Trans. on Sustainable Energy, vol. 3, no. 3, pp. 576-584, 2012.

[6]Pant, S., “Resources of Renewable Energy in India”, Int. J. Engineering Research and Applications, vol. 6, no. 8, part-3, pp. 60-64, 2016.

[7]Manchanda, H., Kumar, M., “A Comprehensive Decade Review and Analysis on Designs and Performance Parameters of Passive Solar Still”, J. Renewables: Wind, Water and Solar, Springer, vol. 2, no. 17, pp. 1-21, 2015.

[8]Hu, Y., Cao, W., Ma, J., “Identifying PV Module Mismatch Faults by a Thermography Based Temperature Distribution Analysis”, IEEE Trans. Device and Materials Reliability, vol. 14, no. 4, pp. 951-960, 2014.

[9]Akram, M.N., Lotfifard, S., “Modeling and Health Monitoring of DC Side of Photovoltaic Array”, IEEE Trans. Sustainable Energy, vol. 6, no. 4, pp. 1245-1253, 2015.

[10]Dorobantu, L., Popescu, M.O., Popescu, C.L., et al., “Depositions Effects and Losses Caused by Shading on Photovoltaic Panels”, IEEE Conf. Proceedings, 3rd Int. Youth Conf. on Energetics (IYCE), Leiria, pp. 1-5, 2011.

[11]“Hand Book for Solar Photovoltaics (PV) Systems” by Organisations-Solar Energy Research Institute of Singapore, Grenzone Pte Ltd, Phoenix Solar Pte Ltd, Singapore Polytechnic, SP Power Grid, Urban Redevelopment Authority, pp. 7-9.

[12]Rogalski, A., “History of Infrared Detectors”, Opto-Electronics Review, Springer, vol. 20, no. 3, pp. 279-308, 2012.

[13]Chaudhary, A.S., Chaturvedi, D.K., “Observing Hotspots and Power Loss in Solar Photovoltaic Array Under Shading Effects Using Thermal Imaging Camera”, Int. J. Electrical Machines and Drives, Journals Publications, vol. 3, no. 1, pp. 15-23, 2017.

[14]Barreira, E., de Freitas, V.P., Delgado, J.M.P.Q., et. al., “Thermography Applications in the Study of Buildings Hygrothermal Behaviour”, Dr. R. V. Prakash, (Ed), pp.  171-192, 2012.

[15]Lin, X., Wang, Y., Pedram, M., “Designing Fault-Tolerant Photovoltaic Systems”, IEEE Design and Test, Journals and Magazines, vol.31, no. 3, pp. 76-84, 2013.

[16]Spagnuolo, G., Xioa, W., Ceacati C., “Monitoring, Diagnosis, Prognosis, and Techniques for Increasing the Lifetime/Reliability of Photovoltaic Systems”, IEEE Trans. Industrial Electronics, vol. 65, no. 11, pp. 7226-7227, 2015.

[17]Davarifar, M., Rabhi, A., Hajjaji A.E., “Comprehensive Modulation and Classification of Faults and Analysis Their Effect in DC Side of Photovoltaic System”, J. Energy and Power Engineering, Scientific Research, vol. 5, pp. 230-236, 2013.

[18]Chaudhary, A.S., Yadav, A., “An Overview of Faults and Health Monitoring Estimation of Solar Photovoltaic Power Generation”, Int. J. Power Electronics Controllers and Converters, vol. 2, no. 2, pp. 19-23, 2016.

[19]Karthick, C., Idrissyedismail, S., Arunkailasam, E., et al., “A Novel Based on Soldier Tracking and Health Monitoring System Using Embedded Technology”, The Int. J. Science and Technoledge, vol. 3, no. 3, pp. 212-217, 2015.

[20]Bagyasri, C. K., Anto Merline, M., “Self Monitoring Vital Signs Measurement using Solar Power”, Int. J. Communication and Computer Technologies, vol. 2, no. 19, issue. 5, pp. 52-56, 2014.

[21]Voss, T. J., Subbian, V., Beyette, F. R., “Feasibility of Energy Harvesting Techniques for Wearable Medical Devices”, IEEE 36th Annual Int. Conf. Engineering in Medicine and Biology Society (EMBC), Chicago, ILLinois, USA, pp. 626-629, 2014.

[22]Rathore, A., Panwar, A., Kumari, D., et al., “A Review on Applications of GSM for Monitoring System”, Int. J. Recent Scientific Research, vol. 6, no. 5, pp. 3778-3780, 2015.

[23]Chae, M. J., Yoo, H. S., Kim, J. R., et al., “Bridge Condition Monitoring System using Wireless Network (CDMA and ZIGBEE)”, 23rd International Symposium on Automation and Robotics in Construction (ISARC), Tokyo, Japan, pp. 32-334, 2006.

[24]Park, G., Rosing, T., Todd, M. D., et al., “Energy Harvesting for Structural Health Monitoring Sensor Networks”, J. Infrastructure Systems, vol. 14, no. 1, pp. 64-79, 2008.

[25]Hodge, V. J., O’Keef, S., Weeks, M., et al., “Wireless Sensor Networks for Condition Monitoring in Railway Industry:A Survey”, IEEE Trans. Intelligent Transportation Systems, vol.16, no. 3, pp. 1088-1016, 2015.

[26]Kim, J-T., Sim, S-H., Cho, S., et al., “Recent R&D Activity on Structural Health Monitoring in Korea”, Structural Monitoring and Maintenance, Techno-Press Ltd, vol. 3, no. 1, pp. 91-114, 2016.

[27]Worden, K., Cross, E. J., Dervilis, N., et al. , “Structural Health Monitoring: From Structures to System-of-Systems”, 9th IFAC Symposium on Fault Detection, Supervision and Safety for Technical Processes SAFEPROCESS, Paris, Elsevier, vol. 48, no. 21, pp. 1-17, 2015 .

[28]Jang, S., Jo, H., Cho, S., et al., “Structural Health Monitoring of a Cable-Stayed Bridge using Smart Sensor Technology: Deployment and Evaluation”, Smart Structures and Systems, vol. 6, no. 5-6, pp. 439-459, 2010 

[29]Martinez-Luengo, M., Kolios, A., Wang, L., “Structural Health Monitoring of Offshore Wind Turbines: A Review Through the Statistical Pattern Recognition Paradigm”, Renewable and Sustainable Energy Reviews, Elsevier, vol. 64, no. , pp. 91-105, 2015.

[30]Nandi, S., Toliyat, H. A., Li, X., “Condition Monitoring and Fault Diagnosis of Electrical Motors-A Review”, IEEE Trans. Energy Conversion, vol. 20, no. 4, pp. 719-729, 2005.

[31]Dubey, Rajeev., Chattopadhaya, S., Kuthanazhi, V., et. al., “All-India Survey of Photovoltaic Module Degradation:2013”, Report of National Centre for Photovoltaic Research and Education (NCPRE), IIT Bombay, Solar Energy Centre, Gurgaon, pp. 89-93, 2013.

[32]Shapiro, D., Robbins, C., Ross, P., “Solar PV operation & Maintenance Issues”, Desert Research Institute, pp. 1-13.

[33]Makenzi, M., Timonah, N., Benedict, M., et. al., “Degradation Prevalence Study of Field-Aged Photovoltaic Modules operating under Kenyan Climate Conditions”, Science Journal of Energy Engineering, vol. 3, no. 1, pp. 1-5, 2015.

[34]Munoz, M.A., Alonso-Garsia, M.C., Vela, N., et. al., “Early Degradation of Silicon PV Modules and Guaranty Conditions”, Solar Energy Elsevier, vol. 85, no. 9, pp. 2264-2274, 2011.

[35]Mohd, S., Boumediene, B., Miloud, B., “Assessment of PV Modules Degradation based on Performances and Visual Inspection in Algerian Sahara”, Int. J. Renewable Energy Research, vol. 6, no. 1, pp. 106-116, 2016.

[36]E. Kaplani, “Detection of Degradation Effects in Field-Aged C-Si Solar Cells through IR Thermography and Digital Image Processing”, Int. J. Photoenergy, vol. 2012, pp. 1-11, 2012.

[37]Chaudhary, A.S., Chaturvedi, D.K., “Thermal Image Analysis and Segmentation to Study Temperature Effects of Cement and Bird Deposition on Surface of Solar Panels”, I.J. Image, Graphics and Signal Processing, MECS Press, vol. 9, no. 12, pp. 12-22, 2017.

[38]Chaudhary, A.S., Chaturvedi, D.K., “Thermal Image Analysis and Segmentation to Study Temperature Effects of Cement and Bird Deposition on Surface of Solar Panels”, I.J. Image, Graphics and Signal Processing, MECS Press, vol. 9, no. 12, pp. 12-22, 2017.