IJEM Vol. 12, No. 2, 8 Apr. 2022
Cover page and Table of Contents: PDF (size: 533KB)
Full Text (PDF, 533KB), PP.11-24
Views: 0 Downloads: 0
Distribution System, Distribution System Reliability, DSR, Power System Analysis, Electric Distribution
Quality of electricity with continuity is the reliability of the power system which is inversely proportional with the duration of power supply interruption. It depends on some expected or unexpected faults/failures on the systems, speed of protecting systems, preventive maintenance, and motivation of technical staffs. The detailed study of the distribution system is more crucial as its reliability is the concern of utility’s fame, service, customers’ satisfactions and reflects to the overall revenue. The relevant articles from the various sources has been collected and analyzed different reliability indices with their significance. Also, to realize the methodology related with reliability analysis, a comparative study among its different components has been carried out and the best techniques for maintaining system reliability are suggested.
Prakash Kafle, Manila Bhandari, Lalit B. Rana, " Reliability Analysis Techniques in Distribution System: A Comprehensive Review", International Journal of Engineering and Manufacturing (IJEM), Vol.12, No.2, pp. 11-24, 2022. DOI: 10.5815/ijem.2022.02.02
[1]A. Shrestha et al., "Assessment of electricity excess in an isolated hybrid energy system: A case study of a Dangiwada village in rural Nepal," Energy Procedia, vol. 160, pp. 76-83, 2019.
[2]R. E. Brown, "Distribution reliability assessment and reconfiguration optimization," in 2001 IEEE/PES Transmission and Distribution Conference and Exposition. Developing New Perspectives (Cat. No. 01CH37294), 2001, vol. 2, pp. 994-999: IEEE.
[3]J. Jose and A. Kowli, "Reliability constrained distribution feeder reconfiguration for power loss minimization," in 2016 National Power Systems Conference (NPSC), 2016, pp. 1-6: IEEE.
[4]P. C. Sekhar, R. Deshpande, and V. Sankar, "Evaluation and improvement of reliability indices of electrical power distribution system," in 2016 National Power Systems Conference (NPSC), 2016, pp. 1-6: IEEE.
[5]A. A. Akintola and C. O. A. Awosope, "Reliability Analysis of Secondary Distribution System in Nigeria: A Case Study of Ayetoro 1 Substation, Lagos State," The International Journal of Engineering and Science (IJES), vol. 6, no. 7, pp. 13-21, 2017.
[6]S. C. Reddy, P. Prasad, and A. J. Laxmi, "Reliability Improvement of Distribution System: A Hybrid Approach Based on GA and NN."
[7]S. Phuyal, D. Bista, and R. Bista. "Challenges, opportunities and future directions of smart manufacturing: a state of art review." Sustainable Futures 2 (2020): 100023.
[8]D. O. Johnson, "Reliability Evaluation of 11/0.415 kV Substations: A Case Study of Substations in Ede Town," International Journal of Engineering Research & Technology, vol. 4, no. 09, pp. 127-135, 2015.
[9]O. Franklin and A. Gabriel, "Reliability analysis of power distribution system in Nigeria: a case study of Ekpoma network, Edo state," Int. Journal of Elect. Elect. Engin, vol. 2, no. 3, 2014.
[10]Electricity Rules, 2050 (1993), G. o. Nepal Rules, 1993.
[11]S. Phuyal, J. Izykowski, D. Bista, and R. Bista. "Internet of Things in power industry: current scenario of Nepal." In International Symposium on Current Research in Hydropower Technologies (CRHT’IX), vol. 9. 2019.
[12]O. Sadeghian, A. Oshnoei, R. Khezri, and M. T. Hagh, "Data clustering-based approach for optimal capacitor allocation in distribution systems including wind farms," IET Generation, Transmission & Distribution, vol. 13, no. 15, pp. 3397-3408, 2019.
[13]R. Mohammadi and H. Rajabi Mashhadi, "A Game Theory Approach to Distribution System Reliability Improvement Based on Customer Requests," Iranian Journal of Electrical and Electronic Engineering, vol. 15, no. 1, pp. 1-13, 2019.
[14]U. A. Geru, "Reliability Analysis and Redesign of Power Distribution System (Case Study of Nazareth Distribution System)," Power, vol. 132, p. 15KV.
[15]L. Gao, Y. Zhou, C. Li, and L. Huo, "Reliability assesment of distribution systems with distributed generation based on Bayesian networks," Engineering Review: Međunarodni časopis namijenjen publiciranju originalnih istraživanja s aspekta analize konstrukcija, materijala i novih tehnologija u području strojarstva, brodogradnje, temeljnih tehničkih znanosti, elektrotehnike, računarstva i građevinarstva, vol. 34, no. 1, pp. 55-62, 2014.
[16]W. S. Majeed and G. H. Abedali, "RELIABILITY IMPROVEMENT IN DISTRIBUTION SYSTEM BY INJECTED DISTRIBUTED GENERATION BASED ON ZONE BRANCHES METHODOLOGY," Journal of Engineering and Sustainable Development, vol. 24, no. 1, pp. 79-93, 2020.
[17]M. Z. Gargari and R. Ghaffarpour, "Reliability evaluation of multi-carrier energy system with different level of demands under various weather situation," Energy, vol. 196, p. 117091, 2020.
[18]B. Khan, H. H. Alhelou, and F. Mebrahtu, "A holistic analysis of distribution system reliability assessment methods with conventional and renewable energy sources," AIMS Energy, vol. 7, no. 4, pp. 413-429, 2019.
[19]M. Dixit, P. Kundu, and H. R. Jariwala, "Integration of distributed generation for assessment of distribution system reliability considering power loss, voltage stability and voltage deviation," Energy Systems, vol. 10, no. 2, pp. 489-515, 2019.
[20]T. T. Moe and M. Thuzar, "Reliability enhancement of radial distribution system using optimal placement of PVDG," in Proceedings of the Universal Academic Cluster International in May Conference in Bangkok, 2019, vol. 16, p. 17.
[21]P. Salyani and J. Salehi, "A customer oriented approach for distribution system reliability improvement using optimal distributed generation and switch placement," Journal of Operation and Automation in Power Engineering, vol. 7, no. 2, pp. 246-260, 2019.
[22]A. R. Kalair, N. Abas, Q. U. Hasan, M. Seyedmahmoudian, and N. Khan, "Demand side management in hybrid rooftop photovoltaic integrated smart nano grid," Journal of Cleaner Production, p. 120747, 2020.
[23]L. Aibin and L. Wenyi, "Reliability evaluation of distribution network with distributed generation based on latin hypercube sequential sampling," in 2020 3rd International Conference on Electron Device and Mechanical Engineering (ICEDME), 2020, pp. 97-99: IEEE.
[24]T. Lantharthong and N. Phanthuna, "Techniques for reliability evaluation in distribution system planning," World Academy of Science, Engineering and Technology, vol. 6, pp. 392-395, 2012.
[25]G. S. Bolacell, L. F. Venturini, and M. A. da Rosa, "Distribution System Reliability Evaluation Considering Power Quality Effects," in 2018 IEEE International Conference on Probabilistic Methods Applied to Power Systems (PMAPS), 2018, pp. 1-6: IEEE.
[26]R. S. de Sousa, C. C. Martins, and M. Sperandio, "Distribution System Reliability Assessment Using Sequential Monte Carlo Simulation," in 2019 IEEE PES Innovative Smart Grid Technologies Conference-Latin America (ISGT Latin America), 2019, pp. 1-6: IEEE.
[27]L. Zemite, J. Gerhards, M. Gorobetz, and A. Levchenkov, "Optimization of distribution system reliability," in 2016 IEEE 16th International Conference on Environment and Electrical Engineering (EEEIC), 2016, pp. 1-6: IEEE.
[28]T. Wang and Y. Wu, "The reliability evaluating method considering component aging for distribution network," Energy Procedia, vol. 16, pp. 1613-1618, 2012.
[29]A. Chowdhury and D. Koval, Power distribution system reliability: practical methods and applications. John Wiley & Sons, 2011.
[30]M. Rausand and A. Høyland, System reliability theory: models, statistical methods, and applications. John Wiley & Sons, 2003.
[31]O. Sadeghian, M. Nazari-Heris, M. Abapour, S. S. Taheri, and K. Zare, "Improving reliability of distribution networks using plug-in electric vehicles and demand response," Journal of Modern Power Systems and Clean Energy, vol. 7, no. 5, pp. 1189-1199, 2019.
[32]J. G. d. C. Costa, A. M. L. da Silva, G. A. Hamoud, I. M. Pureza, and N. S. Neto, "Probabilistic evaluation of distribution power transformers reliability indices considering load transfers and mobile unit substations," Electric Power Systems Research, vol. 187, p. 106501, 2020.
[33]C. Wang, T. Zhang, F. Luo, P. Li, and L. Yao, "Fault incidence matrix based reliability evaluation method for complex distribution system," IEEE Transactions on Power Systems, vol. 33, no. 6, pp. 6736-6745, 2018.
[34]Q. Liao et al., "Reliability Evaluation Method of Low-voltage Distribution Network Based on Linear Equation," in IOP Conference Series: Earth and Environmental Science, 2020, vol. 512, no. 1, p. 012128: IOP Publishing.
[35]D. Zhang, X. Han, C. Jiang, J. Liu, and Q. Li, "Time-dependent reliability analysis through response surface method," Journal of Mechanical Design, vol. 139, no. 4, 2017.
[36]S. Kabir and Y. Papadopoulos, "Applications of Bayesian networks and Petri nets in safety, reliability, and risk assessments: A review," Safety science, vol. 115, pp. 154-175, 2019.
[37]F. Yousefzadeh, "E-Bayesian and hierarchical Bayesian estimations for the system reliability parameter based on asymmetric loss function," Communications in Statistics-Theory and Methods, vol. 46, no. 1, pp. 1-8, 2017.
[38]Y. Su et al., "Online Reliability Assessment of Distribution Feeder Considering Time Sequential Load Transfer Procedure," in 2018 China International Conference on Electricity Distribution (CICED), 2018, pp. 631-635: IEEE.
[39]B. Adegboye and E. Dawal, "Outage analysis and system integrity of an 11kV distribution system," in Advanced Materials Research, 2012, vol. 367, pp. 151-158: Trans Tech Publ.
[40]P. Okorie and A. Abdu, "Reliability Evaluation of Power Distribution Network System in Kano Metropolis of Nigeria," International Journal of Electrical and Electronic Science, vol. 2, no. 1, pp. 1-5, 2015.
[41]F. Izuegbunam, I. Uba, I. Akwukwaegbu, and D. Dike, "Reliability evaluation of Onitsha Power Distribution Network via analytical technique and the impact of PV system," Journal of Electrical and Electronics Engineering, vol. 9, no. 3, pp. 15-22, 2014.
[42]S. Gupta, A. Pahwa, Y. Zhou, S. Das, and R. E. Brown, "An adaptive fuzzy model for failure rates of overhead distribution feeders," Electric Power Components and Systems, vol. 33, no. 11, pp. 1175-1190, 2005.
[43]Y. Jibril and K. Ekundayo, "Reliability assessment of 33kV Kaduna electricity distribution feeders, Northern Region, Nigeria," in Proceedings of the World Congress on Engineering and Computer Science, 2013, vol. 1.
[44]U. Roland and O. Eseosa, "Reliability Prediction of Port Harcourt Electricity Distribution Network Using NEPLAN," The International Journal Of Engineering And Science (IJES), vol. 3, no. 12, pp. 68-79, 2014.
[45]T. A. Short, Electric power distribution handbook. CRC press, 2014.
[46]G. Kjolle and K. Sand, "RELRAD-an analytical approach for distribution system reliability assessment," IEEE Transactions on Power Delivery, vol. 7, no. 2, pp. 809-814, 1992.
[47]J.-H. Teng and C.-N. Lu, "Feeder-switch relocation for customer interruption cost minimization," IEEE transactions on power delivery, vol. 17, no. 1, pp. 254-259, 2002.
[48]R. E. Brown, Electric power distribution reliability. CRC press, 2017.
[49]K. Kirubarani and A. Peer Fathima "Distribution System Reliability Assessment for Improved Feeder Configurations," International Journal of Engineering and Advanced Technology (IJEAT), vol. 8, no. 6, 2019.
[50]Ç. Marialis, "Analysis Of The Distribution System Reliability Indices In A Major Consumption Center In Albania."
[51]U. Eminoglu and R. Uyan, "Reliability Analyses of Electrical Distribution System: A Case Study."
[52]P. Lata and S. Vadhera, "Issues of concerns in power system reliability," in 2015 International Conference on Power, Instrumentation, Control and Computing (PICC), 2015, pp. 1-6: IEEE.
[53]A. PACI, M. ÇELO, and R. BUALOTI, "Distribution System Reliability Indices."
[54]IEEE, "IEEE Guide for Electric Power Distribution Reliability Indices.," IEEE 1366-2012, 2012.
[55]R. Billinton and P. Wang, "Teaching distribution system reliability evaluation using Monte Carlo simulation," IEEE Transactions on Power Systems, vol. 14, no. 2, pp. 397-403, 1999.
[56]A. Tabares, G. Munoz-Delgado, J. F. Franco, J. M. Arroyo, and J. Contreras, "An enhanced algebraic approach for the analytical reliability assessment of distribution systems," IEEE Transactions on Power Systems, vol. 34, no. 4, pp. 2870-2879, 2019.
[57]A. A. Akintola and C. O. A. Awosope, "A Critical Review of Distribution Substation System Reliability Evaluations," International Journal of Advancements in Research & Technology, vol. 6, no. 6, pp. 6-11, 2017.
[58]R. Billinton and R. N. Allan, "Reliability Evaluation of power systems " in Book, 1996.
[59]E. A. Almabsout, R. A. El-Sehiemy, O. N. U. An, and O. Bayat, "A hybrid local Search-Genetic algorithm for simultaneous placement of DG units and shunt capacitors in radial distribution systems," IEEE Access, vol. 8, pp. 54465-54481, 2020.
[60]R. Billinton and J. R. Acharya, "Weather-based distribution system reliability evaluation," IEE Proceedings-Generation, Transmission and Distribution, vol. 153, no. 5, pp. 499-506, 2006.
[61]R. Billinton and J. Acharya, "Distribution system reliability assessment incorporating weather effects," in Proceedings of the 41st International Universities Power Engineering Conference, 2006, vol. 1, pp. 282-286: IEEE.
[62]N. B. D. Choudhury, "Distribution System Failure Assessment Using Fuzzy Fault Tree Analysis," in Intelligent Techniques and Applications in Science and Technology: Proceedings of the First International Conference on Innovations in Modern Science and Technology, 2020, vol. 12, p. 429: Springer Nature.
[63]L. Zhang et al., "Reliability evaluation of modular multilevel converter based on Markov model," Journal of Modern Power Systems and Clean Energy, vol. 7, no. 5, pp. 1355-1363, 2019.
[64]S. S. Raghuwanshi and R. Arya, "Reliability evaluation of stand-alone hybrid photovoltaic energy system for rural healthcare centre," Sustainable Energy Technologies and Assessments, vol. 37, p. 100624, 2020.
[65]W. Li, P. Wang, Z. Li, and Y. Liu, "Reliability evaluation of complex radial distribution systems considering restoration sequence and network constraints," IEEE Transactions on Power Delivery, vol. 19, no. 2, pp. 753-758, 2004.
[66]A. Al-Nujaimi, M. Abido, and M. Al-Muhaini, "Distribution power system reliability assessment considering cold load pickup events," IEEE Transactions on Power Systems, vol. 33, no. 4, pp. 4197-4206, 2018.
[67]A. K. Goswami and D. Saha, "Reconfiguration of Radial Distribution Network Implementing TLBO Algorithm for Loss Minimization and Reliability Improvement," in Intelligent Techniques and Applications in Science and Technology: Proceedings of the First International Conference on Innovations in Modern Science and Technology, 2020, vol. 12, p. 157: Springer Nature.
[68]S. Nagaballi and V. S. Kale, "Pareto optimality and game theory approach for optimal deployment of dg in radial distribution system to improve techno-economic benefits," Applied Soft Computing, p. 106234, 2020.
[69]A. Singh, A. Shrestha, S. Phuyal, B. Adhikari, and A. Papadakis. "Particle swarm optimization approach for distributed generation allocation planning for voltage profile improvement." In 11th International Conference on Deregulated Engineering Market Issues in South Eastern Europe, Nicosia, Cyprus. 2018.
[70]B.B. Pokhrel, A. Shrestha, S. Phuyal, and S.K. Jha, 2021. Voltage Profile Improvement of Distribution System via Integration of Distributed Generation Resources. Journal of Renewable Energy, Electrical, and Computer Engineering, 1(1), pp.33-41.