Low Power and Area Optimized Architectures for BPSK Modulator

Full Text (PDF, 843KB), PP.33-40

Views: 0 Downloads: 0

Author(s)

Usha S.M. 1,* Mahesh H.B. 2

1. JSS Academy of Technical Education/ECE Dept, Bengaluru, 560 060, India

2. PESCE, Bengaluru, 560 050, India

* Corresponding author.

DOI: https://doi.org/10.5815/ijitcs.2018.12.05

Received: 7 Sep. 2018 / Revised: 17 Sep. 2018 / Accepted: 24 Sep. 2018 / Published: 8 Dec. 2018

Index Terms

BPSK, QPSK, BOOTH MULTIPLIER, RTL, Cadence, CMOS, BER, Costas Loop

Abstract

Low power modulators are most efficient for wireless communication. The conventional BPSK modulator consumes more power and area. In this work, the new approaches for BPSK modulator are discussed and recorded. The four new approaches consume less area and power than the conventional design of BPSK Modulator. The power and area consumed by new approaches are compared with the conventional method. Cadence software is used for the simulation and synthesis, the power and area reduction in 180nm, 90nm and 45nm CMOS Technology is reported, MATLAB/SIMULINK is used to do BER analysis of BPSK modulator with AWGN channel. The new architectures enhance the performance of BPSK Modulator in consuming less power and utilizing less area than the conventional design.

Cite This Paper

Usha S.M., Mahesh H.B., "Low Power and Area Optimized Architectures for BPSK Modulator", International Journal of Information Technology and Computer Science(IJITCS), Vol.10, No.12, pp.33-40, 2018. DOI:10.5815/ijitcs.2018.12.05

Reference

[1]U. Raza, P. Kulkarni, and M. Sooriyabandara, “Low Power Wide Area Networks: An Overview,” IEEE Communications Surveys Tutorials, vol. PP, no. 99, pp. 1–1, 2017.
[2]Rasoul Moradi, Ebrahim Farshidi Mohammad Soroosh, A low power passive-active ΔΣ modulator with high-resolution employing an integrator with open-loop unity-gain buffer”, Department of Electrical, Faculty of Engineering, Shahid Chamran University of Ahvaz, Ahvaz, Iran, sep 2018.
[3]H. P. Enterprise, “Low Power Wide Area (LPWA) Networks Play an Important Role in Connecting a Range of Devices,” Business white paper, November 2016.
[4]M. R. Palattella, M. Dohler, A. Grieco, G. Rizzo, J. Torsner, T. Engel, and L. Ladid, “Internet of Things in the 5G Era: Enablers, Architecture, and Business Models,” IEEE Journal on Selected Areas in Communications, vol. 34, no. 3, pp. 510–527, March 2016.
[5]Y. Roth, J.-B. Dor´e, L. Ros, and V. Berg, “Turbo-FSK, a Physical Layer for Low-Power Wide-Area Networks: Analysis and Optimization,” Elsevier Comptes Rendus Physique, vol. 18, no. 2, pp. 178 – 188, 2017.
[6]“LTE Evolved Universal Terrestrial Radio Access (E-UTRA): Physical Channels and Modulation,” 3GPP TS 36.211, V13.2.0, Release 13, Aug 2016.
[7]Y. Roth, “The Physical Layer for Low Power Wide Area Networks: A Study of Combined Modulation and Coding Associated with an Iterative Receiver,” PhD Thesis, University Grenoble Alpes, Jul. 2017.
[8]Y. Roth, J.-B. Dor´e, L. Ros, and V. Berg, “5G Contender Waveforms for Low Power Wide Area Networks in a 4G OFDM Framework,” in 2018 25th International Conference on Telecommunications (ICT) (ICT 2018), Saint Malo, France, Jun. 2018.
[9]Azad Mahmoudi, PooyaTorkzadeh, Massoud Dousti, “A study of analog decision feedback equalization for ADC-Based serial link receivers”, Department of Electrical and Computer Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran, Sept. 2018.
[10]Yoann Roth, Jean-Baptiste Doré, Laurent Ros, “Coplanar Turbo-FSK: A Flexible and Power Efficient Modulation for the Internet-of-Things”, Wireless Communications and Mobile Computing, August 2018.
[11]Y. E. Wang, X. Lin, A. Adhikary et al., “A Primer on 3GPP Narrowband Internet of Things,” IEEE Communications Magazine, vol. 55, no. 3, pp. 117–123, 2017.
[12]Y. Roth, J.-B. Doré, L. Ros, and V. Berg, “EXIT chart optimization of turbo-FSK: application to low power wide area networks,” in Proceedings of the 9th International Symposium on Turbo Codes Iterative Information Processing (ISTC '16), Brest, France, September 2016.
[13]M. R. Palattella, M. Dohler, A. Grieco et al., “Internet of things in the 5G Era: enablers, architecture, and business models,” IEEE Journal on Selected Areas in Communications, vol. 34, no. 3, pp. 510–527, 2016.
[14]Jinting Wang, Linjie Zhou, Haike Zhu, Qianqian Wu, Rui Yang, Lei Liu, Tao Wang, and Jianping Chen, “Silicon high-speed BPSK modulator: design and optimization”, Asia Communications and Photonics Conference 2014, OSA Technical Digest Optical Society of America, 2014.
[15]T. Rebbeck, M. Mackenzie, and N. Afonso, Low-Powered Wireless Solutions Have the Potential to Increase the M2M Market by Over 3 Billion Connections, Analysis Mason, 2014
[16]Asaraf Mohamed Moubark, Mohd Alauddin Mohd Ali,” FPGA implementation of low power digital QPSK modulator using Verilog HDL”,Journal of Applied Sciences, pp.385-392,ISSN 1812-5654, 2013.
[17]Hazrat Ali, Xianwei Zhou, Khalid Iqbal,”FPGA Architecture for OFDM, Software Defined Radio”, IEEE Journal, 2013.
[18]Fanxin Zeng, Xiaoping Zeng, Zhenyu Zhang and Guixin Xuan, “New constructions of 16-QAM periodic complementary sequences” IEEE communications, letters, Vol. 16, no.12, pp 2040-2043, December 2012.
[19]Masud, A., Samsuzzaman, M., Rahman, M. A., “Bit Error Rate Performance Analysis on Modulation Techniques of Wideband Code Division Multiple Access” Journal of Telecommunications, Vol 1, Issue 2, 2010.
[20]Wenmiao Song, Jingying Zhang, Qiongqiong Yao, “Design And Implement Of BPSK Modulator And Demodulator Based On Modern DSP Technology,” IEEE International Symposium. pp. 1135-1137, 2009.
[21]Y. Byungwook, H. L. Kyu and L. Chungyong, “Implementation of IEEE 802.16e MIMO-OFDMA Systems with K-BEST Lattice Decoding Algorithm”, International Conference on Consumer Electronics. Las Vegas, NV, USA, 2007.
[22]Charles U. Ndujiuba, Oluyinka Oni, Augustus E. Ibhaze, “Comparative Analysis of Digital Modulation Techniques in LTE 4G Systems,” Journal of Wireless Networking and Communications pp. 60-66, 2015.