PID Temperature Controller Design for Shell and Tube Heat Exchanger

Full Text (PDF, 697KB), PP.37-46

Views: 0 Downloads: 0

Author(s)

Firew D. Olana 1,* Tadele A. Abose 2

1. Mettu University, Mettu, Ethiopia

2. Addis Ababa institute of technology, Addis Ababa, Ethiopia

* Corresponding author.

DOI: https://doi.org/10.5815/ijem.2021.01.05

Received: 24 Nov. 2020 / Revised: 20 Dec. 2020 / Accepted: 14 Jan. 2021 / Published: 8 Feb. 2021

Index Terms

Heat exchanger, Ziegler-Nichols, Cohen-coon and Chein et al

Abstract

Heat exchangers are one of the most important thermal devices. Shell and tube heat exchangers are the common types of heat exchangers and sustained a wide range of operating temperature and pressure. Modeling and controlling heat exchanger system is a difficult assignment because of its nonlinearity. As the flow rates changes, the gain, time delay and time constant varies, hence causing system nonlinearity. The solution for such problems is finding acceptable mathematical model and design a controller which provides better performance indices. In this paper mathematical model (experimental or empirical based) to represent the real system and design suitable controller which remove the offset and settle fast with minimum steady state error has been proposed. To this end, system model design the Proportional-Integral-Derivative controller for shell and tube heat exchanger using Ziegler Nichols method, Cohen-coon method and Chein et al. method. Since two opposing dynamic effects are existing in the system and has a problem of dynamics of inverse response and large overshoot. Therefore, Chein et al. tuning method have better performance than that of the others. In case of Chein et al. the overshoot of 2.577 % and settling time of 63.1 s.

Cite This Paper

Firew D. Olana, Tadele A. Abose, " PID Temperature Controller Design for Shell and Tube Heat Exchanger ", International Journal of Engineering and Manufacturing (IJEM), Vol.11, No.1, pp. 37-46, 2021. DOI: 10.5815/ijem.2021.01.05

Reference

[1] S. Nithya et al.,” Predictive Controller Design for A Shell and Tube Heat Exchanger,” IEEE- ICAESM, 2007, PP1075-1080.

[2] A. Vasickaninova and M. Bakosova,” Robust Controller Design for a Heat Exchanger,” International Conference on Process Control, IEEE, Kottayam, India, 2016, PP. 113-118.

[3] Kuppan Thulukkanam, Heat Exchanger Design Handbook, Second edition, CRC Press, New York, USA, 2013.

[4] Arun K. Tangirala, Principles of System Identification Theory and Practice, CRC Press, Taylor and Francis Group, Boca Raton, New York, USA, 2015.

[5] Vinaya Krishna V, K. Ramkumar and V. Alagesan,” Control of Heat Exchangers Using Model Predictive Controller,” International Conference On Advances in Engineering, Science and Management, IEEE, Nagapattinam, Tamil Nadu, India, 2012, PP. 242-246.

[6] Shanu Khan, Modeling and Controlling Heat Exchanger Process, Hamirpur, National institute of technology, Lambert Academic publishing, Saarbrucken, Germany, 2017.

[7] B. Wayne Bequette, Process Control Modeling, Design, and Simulation, Prentice, NJ, USA, 2002

[8] Sami El Ferik and Ahmed A. Adeniran,” Modeling and Identification of Nonlinear Systems: A Review of the Multimodel Approach-Part 1,” IEEE Transactions on Systems, Man, And Cybernetics Systems, 2017, V. 47, PP. 2168-2216.

[9] Farzin Piltan, Shahnaz TayebiHaghighi, Nasri B. Sulaiman,"Comparative Study between ARX and ARMAX System Identification", International Journal of Intelligent Systems and Applications (IJISA), Vol.9, No.2, pp.25-34, 2017. DOI: 10.5815/ijisa.2017.02.04

[10] Munna Kumar, Ram Sharan Singh, "PID Controller Design for SOPDT using Direct Synthesis Method", International Journal of Intelligent Systems and Applications(IJISA), Vol.11, No.9, pp.56-64, 2019. DOI: 10.5815/ijisa.2019.09.06

[11] RamaKoteswara Rao Alla, Lekyasri N, Rajani K," PID Control Design for Second Order Systems", International Journal of Engineering and Manufacturing(IJEM), Vol.9, No.4, pp.45-56, 2019.DOI: 10.5815/ijem.2019.04.04

[12] Thanet Ketthong, Satean Tunyasirut, Deacha Puangdownreong, "Design and Implementation of I-PD Controller for DC Motor Speed Control System by Adaptive Tabu Search", International Journal of Intelligent Systems and Applications(IJISA), Vol.9, No.9, pp.69-78, 2017. DOI: 10.5815/ijisa.2017.09.08

[13] Control Design Approach Based on Multi-Linear Models, Proceedings of the American Control Conference, Albuquerque, New Mexico June, 3490-3494, (1997).

[14] Mohammad Ali, Nekoui Seyed and Mohammad Sajadi, “Nonlinear System Identification using Locally Linear Model Tree and Particle Swarm Optimization,” IEEE international conference on industrial technology, Mumbai, India, 1563-1568, (2006).

[15] Yuvraj Bhushan Khare and Yaduvir Sing, “PID Control of Heat Exchanger System,” International Journal of Computer Applications, volume 8, October, 2010, PP 22-27.

[16] Mr.P. Sivakumar, Dr.D. Prabhakaran and Dr.T. Kannadasan,” Temperature Control of Shell and Tube Heat Exchanger by Using Intelligent Controllers-Case Study,” International Journal of Computational Engineering Research, Vol. 2, Issue. 8, 2012, PP 285-292.

[17] Nasser M. Ramli and Haslinda Zabiri,” Control Strategies of Heat Exchanger,” International Journal of Engineering Sciences & Research Technology, ISSN: 2277-9655, February, 2017.

[18] Erik Tridianto et al,” Cascaded PID Temperature Controller for FOPDT Model of Shell and Tube Heat Exchanger Based on Matlab/Simulink,” International Electronics Symposium on Engineering Technology and Applications, Surabaya, Indonesia, 2017, PP. 185-191.

[19] Shinichi Imai and Toru Yamamoto,” Design and Experiment of a IMC-Based PID Controller using Multiple Local Linear Models,” IEEE international conference on emerging technologies and factory automation (ETFA), 6505-6509, (2017).

[20] Aidan O’Dwyer, Hand Book of PI and PID Controller Tuning Rules, Dublin Institute of Technology, Ireland, Imperial College Press, London, (2009).

[21] Kiam Heong Ang and Gregory Chong, “PID Control System Analysis, Design, and Technology,” IEEE Transactions on Control Systems Technology, V.13, 559-576 (2005).

[22] Chien et al.,” Simple PID Controller Tuning Method for Processes with Inverse Response Plus Dead Time or Large Overshoot Response Plus Dead Time,” Industrial and engineering chemistry research, V. 42, 4461-4477, (2003)